data); } */?>

ECCO Aqua


ECCO Aqua is an innovative, biocompatible monthly replacement contact lens with UV filter. The very good bio-compatible abilities are based on a high water adhering bionic material. The surface of the contact lens shows nearly a bio-molecular structure like the mucin layer of the eye. The bio-compatible structure improves – like the natural mucin layer – the stability of the tear film and the wettability of the contact lens. Hyaluronic acid as an ingredient in the unpreserved storing solution of the lens blister leads to a very good spontaneous wearing comfort of the lens. The natural wetting agent acts like a soft pillow between contact lens and cornea and cares for a comfortable feeling while inserting the lens.

Use of lens

ECCO Aqua is best for all frequent replacement contact lens users, who have problems with dry eye sensation or fading wearing comfort during the day. The contact lens has a brilliant optic. Due to the aspheric design slight astigmatisms up to 0.50 dpt. can be corrected.

Recommendations for lens-fitting

Determining factors are the glass refraction and the radius of the cornea. The position of the lens should be controlled in terms of centring, movement and remaining correction after one hour.

Characteristics of an optimal fitting

Adequate movement of the lens while blinking during the day.

Special recommendation

The non-ionic surface, the low tendency of dehydration
and deposits of the lens, lead to the fact that the lens
wearer gets excellent wearing comfort:
High wearing comfort – especially at the end of the day
Because of high abilities to adhere water, lens keeps the design also with dry eye conditions.
No red eyes even with long wearing times.
Good visual accuracy.
Very good compatible for the eyes because of the bio-compatible material.

Technical data

Material:Hioxifilcon A
Water content:55%
Dk/t [at -3.00 dpt]:29
Thickness [at -3.00 dpt]:0.08 mm
Stabilisation:
Handlingstint:light blue
UV-Filter:yes

Range of parameters

Base curve [mm]:8.60, 8.90
Sphere [dpt]:
-12.00 to -6.00 in 0.50-steps
-6.00 to -0.25 in 0.25-steps
+0.25 to +6.00 in 0.25-steps
Diameter [mm]:14.20

Pack sizes

Box of 6 for sales
Single blister for fitting only available in:

Sphere [dpt]: -10.00 to -6.00 in 0.50-steps
  -6.00 to -0.25 in 0.25-steps
  +0.25 to +6.00 in 0.25-steps

Box of 66 for fitting only available in:

Sphere [dpt]: -6.00 to -0.75 in 0.25-steps
  (3 of each power)
Mechanism of water adherence to GMA-material