data); } */?>

ECCO silicone comfort zoom


The ECCO silicone comfort zoom is a multifocal monthly disposable contact lens made from silicone hydrogel. Its lens is concentric, with close-up vision at the center of the contact lens. Thanks to the aberration-corrected front optics and the flexible addition profile, the wearers of this multifocal lens can see perfectly and sharply at all distances. Due to a special production technology the lens has extraordinary wetting abilities and wearing comfort. A diffusion technique is the reason for adherence of hyaluronate gel to the material surface. The extremely hydrophilic hyaluronate guarantees a high water adherence, an excellent wettability and long-lasting wearing comfort. The lean design, the wee-balanced water content and the high oxygen transmissibility complete the features of the lens.

Hyaluronic acid as an ingredient in the unpreserved storing solution of the lens blister leads to a very good spontaneous wearing comfort of the lens. The natural wetting agent acts like a soft pillow between contact lens and cornea and cares for a comfortable feeling while inserting the lens.

Use of lens

ECCO silicone comfort zoom is best for all presbyopic lens users, who have problems with irritated eyes or fading wearing comfort during the day - with a very good oxygen supply.

Recommendations for lens-fitting

Determining factors are the glass refraction and the radius of the cornea. The position of the lens should be controlled in terms of centring, movement, remaining correction and stabilisation after one hour.

Characteristics of an optimal fitting

Adequate movement of the lens while blinking during the whole daily wearing time with constant stabilisation.

Special recommendation

The ECCO silicone comfort zoom is especially designed for eyes with a high oxygen demand, such as long daily wearing times. The extraordinary hyaluronate surface cares for a stable visus during the whole wearing time.
The best visual results are achieved up to an addition of 2.00 dpt. In addition, the fitting of modified monovision is recommended.

Technical data

Material:Genifilcon A
Water content:45%
Dk/t [at -3.00 dpt]:100
Thickness [at -3.00 dpt]:0.07 mm
Stabilisation:
Handlingstint:light blue
UV-Filter:yes
Modulus:0.8

Range of parameters

Base curve [mm]:8.60
Sphere [dpt]:
-12.00 to -6.00 in 0.50-steps
-6.00 to +4.00 in 0.25-steps
+4.00 to +6.00 in 0.50-steps
Diameter [mm]:14.20
Addition [dpt]:1.00 / 1.50 / 2.00 / 2.50

Pack sizes

Box of 3 for sales
Single blister for fitting